Hongji Message

Please enter your name:

Please enter your phone:

Please enter your e-mail:

Please enter your information:

Coal Pressure Ball Machine

Coal Pressure Ball Machine

  [ Introduction ]
Type coal pressure ball machine, also called Pulverized coal pressure ball machine.

If you have any questions or requirements, please call us or send email to  info@hongjigroup.com

Hongji Product Introduce

Coal Pressure Ball Machine or coal briquetting machine is also called coal ash briquette machines, coal briquetting plant or coal briquette plant whose molding process can be classified into cold briquetting and hot briquetting, and the former occupies an important position. Cold briquetting can be further divided into binder forming and no binder forming, and people give a priority to the former. According to our national conditions, fine coal briquetting mainly adopts the forming process that adds binder, uses mesolow, avoids drying and employs cold pressing.

Coal Pressure Ball Machine of Introduction

Type coal pressure ball machine, also called Pulverized coal pressure ball machine or Coal Briquetting Press Machine, the molding process of this machine is divided into cold pressing and hot pressing , the cold pressing molding is the main;Cold pressing molding is divided into adhesive and non adhesive forming, give priority to with a binder forming. According to China's national conditions, the pulverized coal forming always adapts to adding binder, low pressure, avoid dry, cold press molding process.

Application of Hongji coal briquetting plant

Hongji coal briquetting machines can be used to suppress various powders, scrap, waste residue such as pulverized coal, iron powder, coking coal, aluminum ash, iron filings, iron oxide scale, carbon dust, powdered carbon, slag, gypsum, gangue, sludge, kaolin, active carbon, coke breeze and so on. Coal briquetting machines and coal briquette machines are widely used in refractory, powder plant, metallurgical, chemical engineering, energy, transportation, heating and other industries.

The structure of the Coal Pressure Ball Machine

Type coal pressure ball machine,or coal press ball machine,coal briquette machine, consists of three parts: feeding part, transmission part,The forming part.

1.Feeding part is mainly used to realize the quantitative feeding to ensure uniform material into the roller.

2.The main drive system of transmission parts is: the motor - triangle strip - reducer - open gear - roll.

3.Molding part, mainly refers to the host part, the core part is the roll.

All of those that easy to collapse in combustion and meagre coal, anthracite, slime and the lignite coal with high moisture of weathering and peat are need to improve the thermal stability by forming, so as to reduce the ash content and make good briquette. According to a certain process, we can use the pulverized coal, coke, iron ore powder, dolomite and other furnace burden to make briquette and then to smelt iron by pellets. Coal briquette machine and coal briquette plant can reduce the cost in iron industry and improve the utilization rate and the iron production. In the fertilizer industry, putting adhesive into a lot of anthracite coal to make pellets and replacing partial lump coal to make gas will produce enormous benefits.

Technical parameters of the Coal Pressure Ball Machine

Type Production scopes(t/h) Production scopes (ten thousand t/a) Power(kw) Reducion box
290 2 0.5 5.5 ZQ300
360 4 1 7.5 ZQ350
400 6 1.5 11 ZQ400
430 7 1.7 11 ZQ450
450 8 2 15 ZQ500
500 10 2.5 18.5 ZQ650
600 12 3 22 ZQ850
850 25 10 75 ZQ1000
1000 35 20 110 ZQ1250



All Rights Reserved : Henan Hongji Mine Machinery CO., LTD.     Add: No.18, No.668 (Hongji Industrial Park), West Zhongyuan Road, Zhengzhou, China
Phone / Fax : 86-371-67662768 / 86-371-67668558     Email : info@hongjigroup.com